Description
The Basic Nutrient Controller is a system that automatically controls EC (fertilizer) and pH levels, ideal for hydroponic crops.
This controller allows you to continuously measure and automatically dose your liquid fertilizers, while regulating the pH in your tanks.
A very simple, precise and complete system, suitable for any irrigation system or application.
HOW TO USE THE BASIC NUTRIENT CONTROLLER
The basic nutrient controller continuously measures pH and EC. Automatically and according to the reading of both parameters, it doses the fertilizers that are added to the irrigation water by means of a peristaltic pump system.
NUTRIENT BASIC CONTROLLER DOSING FLOW
The dosage flow of each of the pumps is adjustable from 0 to 400 cc/h and from 0 to 7 lt/h independently. The equipment is prepared to dose in vats for the preparation of mixtures or for the homogenization of parameters.
The basic nutrient controller has 2 nutrient pumps (A and B) and a pH regulation pump.
TECHNICAL CHARACTERISTICS OF THE BASIC NUTRIENT CONTROLLER
- Peristaltic pumps with adjustable flow from 0 to 400 cc/h
- Automatic subscriber control by conductivity
- Automatic pH control
- pH measurement range from 0 to 14
- Accuracy error of both measurements: 1%
- pH probe included
- Conductivity probe with ATC included
- Quick connections between equipment and probes
- Independent ON/OFF switches per pump
- Regulation of the pH once the fertilizers have been dosed
- Flow sensor for recirculation included
- Power: 230 V and 50/60 Hz
- Suction kit and delivery connection included for each pump
- Maximum dosing pressure 1.5
WHAT PARTS DOES THE CONTROLLER INCLUDE?
The Controller has different elements that must be assembled according to the instructions for use that are attached to the device. The items you can find are:
- pH & EC controller ProSystemAqua
- pH probe
- EC probe
- pH probe holder
- Ec Connector Wire
- Discharge and suction pipes
- injectors
- supports
- Plugs and screws for fixing
- 1 plastic collector
- teflon roll