Automatic PH Controller

Description

pH controller composed of a digital proportional pH reduction dosing device of 0.30 l/h and an electrode for its detection of range 0-14, powered by 220v electrical voltage and low consumption.

The automatic pH controller is designed and prepared to regulate a required pH level in irrigation water, whatever the desired parameter. In this way and in a totally automatic and independent way, it will take care of dosing the product in proportion to the need by means of a simple previous regulation, in which we will indicate the level that we want to maintain in the water tank.

WHAT DOES THE AUTOMATIC PH CONTROLLER INCLUDE?

This nutrient controller comes fully equipped for complete installation, including: pH electrode, suction and discharge fittings, suction and discharge tubes, pH7 solution and fixing bracket and screws.

TECHNICAL CHARACTERISTICS OF THE AUTOMATIC PH CONTROLLER

• Peristaltic pump with regulation proportional to the pH signal
• Automatic pH control
• pH operating range: 4-8
• Sensitivity: 0.1 pH units
• Sonda pH incl. Modelo: SpH-1-S-1.5 (1.5 metros de cable). Connector BNC
• 4-digit 7-segment display
• 3 position switch: Priming, On and Stand By
• Dosing method ON:OFF, adjustable set point
• Calibration method: 1 point (pH 7)
• Possibility of programming the pump to dose both acid and alkaline